Sony PDW510 Operation Manual - Page 173
Maintenance, 10-2-1 Cleaning the Viewfinder, 10-2-2 Note About the Battery Terminal
View all Sony PDW510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
10-2 Maintenance 10-2-1 Cleaning the Viewfinder Use a dust blower to clean the CRT screen and mirror inside the viewfinder barrel. Clean the lens and protecting filter with a commercially available lens cleaner. Caution Never use organic solvents such as thinners. Disassembling the eyepiece for cleaning Viewfinder Eyecup Protecting Packing barrel holder filter ring Eyecup Be sure to correctly assemble the fog-proof filter, the packing ring, and the eyecup so that the reassembled eyepiece is waterproof. Note When cleaning the fog-proof filter, wipe it very gently with a soft cloth to avoid damaging the anti-fogging coating. 10-2-2 Note About the Battery Terminal The battery terminal of this unit (the connector for battery packs and AC adaptors) is a consumable part. The unit may not operate properly if the pins of the battery terminal are bent or deformed by shock or vibrations, or if they become corroded due to prolonged outdoor use. If you notice bending, deformation, or surface corrosion, contact your dealer or a Sony service representative as soon as possible to have the battery terminal replaced. Periodic inspections are recommended to keep the unit working properly and to prolong its usable lifetime. Contact your dealer or a Sony service representative for more information about inspections. 1 Detach the eyepiece from the viewfinder barrel. For the detaching procedure, see 9-2-6 "Detaching the Eyepiece" on page 158. 2 Remove the eyecup from the eyecup holder. 3 Remove the protecting filter, together with the packing ring, from inside the eyecup holder. 4 Detach the protecting filter from the packing ring. Fog-proof filter Depending on the temperature and humidity, the protecting filter may mist because of vapor or your breath. To ensure that the viewfinder is always clear, replace the protecting filter with a fog-proof filter (Part No. 1-547341-11, not supplied). Fitting the fog-proof filter Replace the protecting filter on the packing ring with the fog-proof filter. Chapter 10 Maintenance 173 10-2 Maintenance