Sony PDW510 Operation Manual - Page 136
Selecting the Lens File, 7-3-8 Selecting the Aspect Ratio, If you do not want to use a lens file
View all Sony PDW510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
TIME ADJUST ESC HOUR MIN SEC : 12 : 55 : 58 YEAR MONTH DAY : 00 : 07 : 31 OK Item HOUR MIN Description Sets the hour value. Sets the minutes value. SEC YEAR MONTH Sets the seconds value. Sets the year. Sets the month. DAY Sets the day. 5 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob. The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark. 6 Turn the MENU knob to display the desired value, and press the MENU knob. The z mark changes to a b mark and the ? mark changes to a z mark. 7 To continue the remaining settings, repeat steps 5 and 6. 8 When you finish settings, turn the MENU knob to move the b mark to "OK", then press the MENU knob. The internal clock is set with the date and time set in steps 5 to 7. The TIME/DATE page of the DIAGNOSIS menu appears again. The time set on the TIME ADJUST setting window is displayed. To cancel the setting Before executing step 8, move the b mark to "ESC" at the top right of the window and press the MENU knob. Alternatively, push the CANCEL/PRST / ESCAPE switch down to the ESCAPE side. All settings or changes are discarded and the TIME/DATE page of the DIAGNOSIS menu appears. 7-3-7 Selecting the Lens File The LENS FILE page of the USER menu allows you to change the lens file according to the lens in use. When you are using a serial lens, you can automatically load the lens file number corresponding to your lens by setting LENS AUTO RECALL in the LENS FILE 1 page of the FILE menu to ON. Proceed as follows to select the lens file. 1 Set the MENU ON/OFF switch to ON. The last accessed menu page appears on the screen. 2 Turn the MENU knob until the LENS FILE page appears, then press the MENU knob to select the page. The LENS FILE page shows the number and the name of the currently selected lens file. U15 LENS FILE TOP LENS FILE SELECT: 1 F.ID : L.ID: L.MF: 3 Turn the MENU knob to move the b mark to LENS FILE SELECT, and press the MENU knob. The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark. 4 Turn the MENU knob until the lens file No. in use appears, then press the MENU knob. The z mark changes to a b mark and the ? mark changes to a z mark. If you do not want to use a lens file Select NO OFFSET. 5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section. 7-3-8 Selecting the Aspect Ratio The FORMAT page of the OPERATION menu allows you to select the aspect ratio of the video output signal. Note When the CA-701/702/702P camera adaptor is used with the camcorder, this function is not available. To select the aspect ratio, disconnect the CA-701/702/702P camera adaptor from the camcorder or turn off the power of the CA-701/702/702P camera adaptor. Proceed as follows. Chapter 7 Menu Displays and Detailed Settings 136 7-3 Adjustments and Settings From Menus