Sony PDW510 Operation Manual - Page 125
Setting the Viewfinder, Set the MENU ON/OFF switch to ON.
![]() |
View all Sony PDW510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
U07 MARKER 1 TOP MARKER : OFF CENTER : OFF SAFETY ZONE : OFF SAFETY AREA : 90% ASPECT : OFF ASPECT SELECT : 4:3 ASPECT MASK : OFF ASPECT MASK LVL : 1/4 100% MARKER : OFF You can set the following items on the MARKER 1 page. Item MARKER CENTER SAFETY ZONE SAFETY AREA ASPECT ASPECT SELECT ASPECT MASK (4:3)1) ASPECT MASK LVL 100 % MARKER Description Not to display all markers, set to OFF. To display the center marker, set to ON. To display the safety zone, set to ON. To select the safety zone range (80%, 90%, 92.5 % or 95 %), when SAFETY ZONE is set to ON. To display the aspect marker, set to ON. To select the type of the aspect marker. To make the areas out of the selected aspect marker dimmer, set to ON. To set the mask level (1/2, 1/4 or 1/8), when the ASPECT MASK is set to ON. To display the effective pixel area, set to ON. 1) The ASPECT MASK item is for processing the signal to be output to the viewfinder. When R, G, or B is selected for the TEST OUT SELECT item from the menu, the same video signal is output to the viewfinder and the TEST OUT connector. Thus, when the ASPECT MASK (4:3) item is set to "ON" with R/G/B selected, the masked video signal is output to the TEST OUT connector. 3 Perform the settings for each item. 1 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob. The b mark on the left of the selected item changes to the z mark and the z mark on the left of the setting changes to a ? mark. 2 Turn the MENU knob to change the setting, and press the MENU knob. The z mark on the left of the selected item changes to a b mark and the ? mark on the left of the setting changes to a z mark. 4 To continue setting other items, repeat step 3. 5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section. The menu disappears from the screen, and the display indicating the current status of the camcorder appears along the top and bottom of the screen. 7-2-5 Setting the Viewfinder Use the VF SETTING page of the USER menu to select items related to the viewfinder. MENU knob CANCEL/PRST / ESCAPE switch MENU ON/OFF switch 1 Set the MENU ON/OFF switch to ON. The last accessed menu page appears on the screen. 2 Turn the MENU knob until the VF SETTING page appears, and press the MENU knob to select the page. U09 VF SETTING ZEBRA : ZEBRA SELECT : ZEBRA1 DET.LEVEL: ZEBRA1 APT.LEVEL: ZEBRA2 DET.LEVEL: VF DETAIL LEVEL : VF ASPECT : OFF 1 70% 10% 100% OFF AUTO Item Description ZEBRA Turns the zebra display on or off. 1) ZEBRA SELECT Selects ZEBRA 1, ZEBRA 2 or BOTH. ZEBRA 1 DET. LVL Adjusts the level of the zebra 1 (70%) display. ZEBRA 1 APT. LVL Adjusts the aperture level of the zebra 1 display. (1 to 10 to 20) ZEBRA 2 DET. LVL Adjusts the level of the zebra 2 (100%) display. VF DETAIL LEVEL Adjusts the sharpness of the viewfinder (-99 to 0 to 99). 2) Turns the VF detail function on or off and adjusts the level. VF ASPECT Selects the viewfinder aspect ratio. (AUTO/16:9) 3) 1) When you use the viewfinder which is not equipped with the ZEBRA switch, turns the display on or off using this item. When you use the viewfinder with the ZEBRA switch, the most recent operation of the ZEBRA switch and this menu operation is effective. 2) The sharpness setting at the viewfinder does not affect the recorded image. 3) When the VF ASPECT item is set to "AUTO", this is linked to the 16:9/ 4:3 selection on the FORMAT page. When the VF ASPECT item is set to "16:9", but "4:3" is selected on the FORMAT page, then it is not possible to mix the zebra display and marker display signals on the output signal from the TEST OUT connector. Chapter 7 Menu Displays and Detailed Settings 125 7-2 Status Display on the Viewfinder Screen
![](/manual_guide/products/sony-pdw510-operation-manual-3af19f8/125.png)