Sony RDR-HX900 Operating Instructions - Page 27

Press ENTER when Finish appears., and press ENTER.

Get Sony RDR-HX900 PDF manuals and user guides
UPC - 027242644328
View all Sony RDR-HX900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Hookups and Settings "16:9": For wide-screen TVs or standard TVs with a wide screen mode. For details, see "TV Type" on page 87. 18Press ENTER. The Setup Display for selecting the type of jack used to connect to your amplifier (receiver) appears. 21Press ENTER. The Setup Display for the DTS signal appears. EASY SETUP Audio Connection 7/7 DTS On Off EASY SETUP Audio Connection 7/7 Is this recorder connected to an amplifier (receiver)? Select the type of jack you are using. Yes : LINE OUT(R-AUDIO-L) Yes : DIGITAL OUT No 19Select the type of jack (if any) you are using to connect to an amplifier (receiver), and press ENTER. If you did not connect an AV amplifier (receiver), select "No," then go to step 23. If you connected an AV amplifier (receiver) using just an audio cord, select "Yes: LINE OUT (R-AUDIO-L)," then go to step 23. If you connected an AV amplifier (receiver) using either a digital optical or coaxial cord, select "Yes: DIGITAL OUT." 20Select the type of Dolby Digital signal you wish to send to your amplifier (receiver). 22Select whether or not you wish to send a DTS signal to your amplifier (receiver), and press ENTER. If your AV amplifier (receiver) has a DTS decoder, select "On." Otherwise, select "Off." 23Press ENTER when "Finish" appears. Easy Setup is finished. All connections and setup operations are complete. If you use the cable box/satellite receiver control, check that the control works correctly (see below). EASY SETUP Easy Setup is finished. Finish EASY SETUP Audio Connection 7/7 Dolby Digital D-PCM Dolby Digital You must leave the recorder turned off for at least 24 hours to receive the TV Guide On Screen data. If your recorder is connected to a cable box, be sure to leave the cable box turned on. If your AV amplifier (receiver) has a Dolby Digital decoder, select "Dolby Digital." Otherwise, select "D-PCM." To return to the previous step Press O RETURN. z Hint If you want to run Easy Setup again, select "Easy Setup" in the Setup Display (page 95). Notes • To record TV programs using the timer, you must set the clock accurately. • If you use an S-video cord to connect your cable box or satellite receiver, set "Line1 Input" or "Line3 Input" in Video Setup to "S Video" (page 89). ,continued 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
27
Hookups and Settings
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see “TV Type” on page 87.
18
Press ENTER.
The Setup Display for selecting the type of
jack used to connect to your amplifier
(receiver) appears.
19
Select the type of jack (if any) you are
using to connect to an amplifier (receiver),
and press ENTER.
If you did not connect an AV amplifier
(receiver), select “No,” then go to step 23.
If you connected an AV amplifier (receiver)
using just an audio cord, select “Yes: LINE
OUT (R-AUDIO-L),” then go to step 23.
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT.”
20
Select the type of Dolby Digital signal you
wish to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
21
Press ENTER.
The Setup Display for the DTS signal appears.
22
Select whether or not you wish to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select “On.” Otherwise, select “Off.”
23
Press ENTER when “Finish” appears.
Easy Setup is finished. All connections and
setup operations are complete.
If you use the cable box/satellite receiver
control, check that the control works correctly
(see below).
To return to the previous step
Press
O
RETURN.
z
Hint
If you want to run Easy Setup again, select “Easy Setup”
in the Setup Display (page 95).
Notes
•
To record TV programs using the timer, you must set
the clock accurately.
•
If you use an S-video cord to connect your cable box or
satellite receiver, set “Line1 Input” or “Line3 Input” in
Video Setup to “S Video” (page 89).
EASY SETUP
Audio Connection
7/7
Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.
Yes :
LINE OUT(R-AUDIO-L)
Yes :
DIGITAL OUT
No
EASY SETUP
Audio Connection
7/7
Dolby Digital
D-PCM
Dolby Digital
You must leave the recorder turned off for
at least 24 hours to receive the TV Guide
On Screen data. If your recorder is
connected to a cable box, be sure to leave
the cable box turned on.
Audio Connection
7/7
DTS
On
Off
EASY SETUP
EASY SETUP
Easy Setup is finished.
Finish
,
continued