Sony SCD-C2000ES Operating Instructions - Page 10
Selecting the playback layer, Basic operations during play, To locate a track directly - player
UPC - 027242686793
View all Sony SCD-C2000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7 Press N. Playback starts from the first track. If you want to start playing from a specific track, turn l AMS L (or press ./> on the remote repeatedly) to select the track number before pressing N. 8 Adjust the volume on the amplifier. Basic operations during play To Stop play Pause play Resume play after pausing Select a track Select a disc Select a disc directly Eject a disc Do the following: Press x. Press X. Press X or N. Turn l AMS L (or press ./> on the remote repeatedly). Press DISC SKIP (or DISC SKIP +/- on the remote) repeatedly. Press DISC 1-5 on the player. When using the remote, follow the procedure below. 1 Press DISC. 2 Press the corresponding numeric button for the disc. 3 Press ENTER. Press A OPEN/CLOSE on the player. Note During playback, increase the volume level gradually starting from the lowest level. The output from this player may contain band width that is out of the normal listening range. This may cause damage to the speakers or ears. To locate a track directly by entering the track number Press the numeric button(s) on the remote to enter the track number. To enter a track number 11 or over 1 Press >10 on the remote. 2 Enter the corresponding digits. To enter 0, press 10/0 on the remote instead. Example: To play track number 30, press >10, then 3 and 10/0. To play track number 100, press >10 twice, then 1, and 10/0 twice. Selecting the playback layer When playing a hybrid disc with an SA-CD layer and a CD layer (page 5), you can select the layer you want to listen to. Also, since both layers are on one side, it is not necessary to turn the disc over. The factory setting is "SEL SA- CD" (SA-CD layer). Press SA-CD/CD to select the desired playback layer. To select the default playback layer 1 Press MENU on the player. 2 Turn l AMS L (or press ./> on the remote repeatedly) until "LAYER SEL" appears in the display. 3 Press l AMS L (or ENTER on the remote). The current default layer appears. 4 Turn l AMS L (or press ./> on the remote) to select the desired playback layer. 5 Press l AMS L (or ENTER on the remote). Selecting the playback area When playing a disc with the 2 channel playback area and the multi-channel playback area (page 5), you can select the playback area you want to listen to. Press MULTI/2CH to select the desired playback area. To select the default playback area 1 Press MENU on the player. 2 Turn l AMS L (or press ./> on the remote repeatedly) until "M/2ch SEL" appears in the display. 3 Press l AMS L (or ENTER on the remote). The current default area appears. 10US