Sony SCD-C2000ES Operating Instructions - Page 7

Getting Started 2CH OUT ANALOG 5.1CH OUT FRONT SURR CENTER L L R R SUB WOOFER DIGITAL(CD) OUT COAXIAL OPTICAL IR REMOTE IR IN Connecting a stereo amplifier or MD deck When you connect a stereo amplifier or make an analog connection with an MD deck, connect the player and the component through the ANALOG 2CH OUT jacks. Use an audio connecting cord for this connection. Be sure to match the color-coded pin to the appropriate jacks: white (left) to white and red (right) to red. To multi-channel amplifier, AV amplifier, etc. A B CD A: To front speaker input jacks (L/R) B: To surround or rear speaker input jacks (L/R) C: To sub woofer input jack D: To center speaker input jack Notes • When you make the multi-channel connection, connect the ANALOG 2CH OUT jacks also using another audio connecting cord so that you can play a CD (or Super Audio CD) when you set the input selector of your amplifier to CD (or Super Audio CD) input. • During playback of a conventional CD or a 2CH Super Audio CD, the same signal that is output from the ANALOG 5.1CH OUT FRONT L/R jacks is also output from the ANALOG 2CH OUT jacks. • During playback of a Multi-channel Super Audio CD, the same signal that is output from the ANALOG 5.1CH OUT FRONT L/R jacks is also output from the ANALOG 2CH OUT jacks. (The down mixed signal of the multi-channel signal is not played back.) • There are 5CH, 4CH, and 3CH Super Audio CD. When you play these discs, the signal does not output from all the jacks of the ANALOG 5.1CH OUT. For details of the playback, see the cover or instructions of the Super Audio CD. Audio connecting cord (not supplied*) White (L) Red (R) * If you do not make the ANALOG 5.1CH connection, you can use the supplied audio connecting cord for the ANALOG 2CH connection. 2CH OUT ANALOG 5.1CH OUT FRONT SURR CENTER L L R R SUB WOOFER DIGITAL(CD) OUT COAXIAL OPTICAL IR REMOTE IR IN To CD (Super Audio CD) or line input jacks (L/R) on a stereo amplifier, MD deck, etc. Notes • When a disc with the 2 channel area and multi- channel area is played through the ANALOG 2CH OUT jacks, change the default playback area to "SEL- 2ch" (2 channel playback area) (see page 10). If you do not, the multi-channel playback area will be automatically played back and only the signal to the front speakers will be output. In this case, the vocals or other sounds may not be heard, depending on the disc. • During playback of a Multi-channel Super Audio CD, the same signal that is output from the ANALOG 5.1CH OUT FRONT L/R jacks is also output from the ANALOG 2CH OUT jacks. (The down mixed signal of the multi-channel signal is not played back.) continued 7US