Sony SCD-XA5400ES Operating Instructions - Page 24
Selecting the Playback Layer, Selecting the Playback Area of a Super Audio CD
View all Sony SCD-XA5400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Selecting the Playback Layer When playing a hybrid disc with a Super Audio CD layer and a CD layer (page 8), the player plays the Super Audio CD layer automatically. You can select the CD layer. SA-CD/CD Selecting the Playback Area of a Super Audio CD When playing a disc with the 2-channel playback area and the multi-channel playback area (page 8), you can select the playback area you want to listen to. You can select the playback area in HDMI ON mode only (page 15). MULTI/2CH SA-CD/CD MULTI/2CH Press SA-CD/CD in stop mode. "SA-CD" on the display turns to "CD," and the CD layer is selected to be played back. If you press SA-CD/CD again, the Super Audio CD layer is selected. If you change a disc, the selected playback layer is cleared. Tip Since both layers are on one side, it is not necessary to turn the disc over. Press MULTI/2CH in stop mode. When the multi-channel playback area is selected, "MULTI" appears on the display. When the 2-channel playback area is selected, "MULTI" disappears. To play a multi-channel Super Audio CD Connect the player to a multi-channel amplifier via the HDMI OUT jack. Set the balance and distance of the speakers on the connected amplifier. Note The playback area selected by this operation is valid only for the current disc. 24GB