Sony SRG120DU Product Manual (SRG-120DU Operation Guide) - Page 10
White Balance Menu
View all Sony SRG120DU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
WDR (VIEW-DR) (Wide dynamic range mode): When MODE (exposure mode) is set to FULL AUTO, the camera distinguishes light and dark areas in the same scene, adjusts the brightness for dark areas, and also controls the blown out highlights. You can select the wide dynamic range mode from among OFF, LOW, MID and HIGH. Notes • You can set the wide dynamic range mode when WDR (VIEW-DR) is set to FULL AUTO only. • When WDR (VIEW-DR) is not set to OFF, the MODE setting is fixed at FULL AUTO. • When changing WDR (VIEW-DR), a change in screen luminance occurs for a moment. • When the change of exposure is big, the screen may stop for a moment. GAIN LIMIT: Select the upper limit of the gain rise in FULL AUTO, SHUTTER PRI and IRIS PRI modes. Select from among 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 43 dB. EX-COMP (exposure compensation) When MODE is set to one of FULL AUTO, SHUTTER PRI or IRIS PRI, set this item to ON to enable exposure compensation. When you set EX-COMP to ON, LEVEL appears and you can select the exposure compensation level from among the following: -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6, +7 If you set the level to 0, exposure compensation will be disabled. Level +7 is the brightest and -7 is the darkest compensation value. When EX-COMP is set to OFF, exposure compensation does not function. SLOW SHUTTER When you set the mode to ON, the camera automatically uses slow shutter speed for exposure as the illumination of the object to be shot decreases. This mode is only available when AE mode is set to FULL AUTO. WHITE BALANCE Menu The WHITE BALANCE menu is used to select the white balance mode. MODE (white balance mode) Select the white balance mode from among the following: AUTO, IN DOOR, OUT DOOR, ONE PUSH, ATW (Auto Tracing White Balance), MANUAL When you select MANUAL, R.GAIN (red gain) and B. GAIN (blue gain) appear. You can select each item in the range from -128 to 127. When you select the ONE PUSH mode Perform the following operations. 1 Zoom in on a white subject in the center of the screen. 2 Press the HOME button of the supplied infrared remote commander. The one-push white balance adjustment is activated. When DISPLAY INFO (page 12) is set to ON on the SYSTEM menu, the result of the white balance adjustment is displayed on the computer screen. 10