Sony SRG120DU Product Manual (SRG-120DU Operation Guide) - Page 14

Operation Using the Supplied Infrared Remote Commander Pan/Tilt and Zoom Operation Panning and Tilting 1 CAMERA SELECT REV 2 STD PAN-TILT RESET HOME L/R DIRECTION SET 1 Press the POWER switch. The camera will turn on and perform the pan/tilt reset operation automatically. 2 Press the arrow button to pan or tilt the camera. While checking the picture on the screen, press the desired arrow button. To move the camera little by little, press the button just for a moment. To move the camera in a wide range, press and hold the button. To move the camera diagonally, press the B or b button while holding down the V or v button. To face the camera back to the front Press the HOME button. If the camera moves in a different direction from the one you intended The camera is preset so that the image output from the camera is rotated toward the right whenever you press the b button. To face the camera toward the opposite direction You might wish to face the camera toward the opposite direction from that of the button you pressed, for example, when you change the direction of the camera while checking the picture on the screen. In such a case, press the 2 (REV) button while holding down the L/R DIRECTION SET button. Arrow button Movement of the camera Setting While holding down Press To reset the setting To reset the setting, press the 1 (STD) button while holding down the L/R DIRECTION SET button. Arrow button Movement of the camera Setting While holding down Press Note The setting above only changes the signal emitted from the infrared remote commander, and does not change the setting of the camera itself. Therefore, repeat the setting for each infrared remote commander if you are using more than one infrared remote commander. When the STANDBY lamp is blinking The STANDBY lamp blinks. If the camera is moved forcibly, or a finger or other object interferes with camera movement, the camera may fail to memorize the pan/tilt position. Press the PAN-TILT RESET button to reset the pan/tilt position. 14