Sony STR-DH520 Operating Instructions - Page 12
To use the buttons printed in, To control the receiver, INPUT MODE - muting
UPC - 027242809369
View all Sony STR-DH520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To use the buttons printed in pink Hold down SHIFT (O), then press the button printed in pink that you want to use. Example: Hold down SHIFT (O), then press ENT/MEM (C). 2 Press ENT/MEM 1 Hold down SHIFT To control the receiver B ?/1* (on/standby) Turns the receiver on or sets it to standby mode. Saving the power in standby mode When "CTRL.HDMI" is set to "CTRL OFF" (page 56). C Input buttons** Selects the equipment you want to use. When you press any of the input buttons, the receiver turns on. The buttons are assigned to control Sony equipment. Numeric buttons** Hold down SHIFT (O), then press numeric buttons to preset or tune to the preset stations. ENT/MEM Hold down SHIFT (O), then press ENT/MEM to store a station during tuner operation. D DIMMER Adjusts the brightness of the display panel in 3 levels. E INPUT MODE Selects the input mode when the same equipment is connected to both digital and analog jacks. F DISPLAY Views information on the display panel. I AMP MENU Displays the menu to operate the receiver. J , V/v/B/b Press V/v/B /b to select the settings, then press to enter/confirm the selection. M TUNING +/- Scans a station. PRESET +/- Selects preset stations. D.TUNING Enters direct tuning mode. N SOUND FIELD +**/- Selects a sound field. O SHIFT Changes the remote control button function to activate the buttons printed in pink (page 12). Q MASTER VOL +/- or +/- Adjust the volume level of all speakers at the same time. R MUTING or Turns off the sound temporarily. Press the button again to restore the sound. S RETURN/EXIT O Returns to the previous menu. W AUTO VOL Adjusts the volume automatically depending on the input signal or content from the connected equipment (ADVANCED AUTO VOLUME function). This function is useful, for example, when the sound of a commercial is louder than the TV programs. Notes • Be sure to reduce the volume level before you turn off this function. • As this function is available only when Dolby Digital, DTS or Linear PCM signals are input, the sound may suddenly increase when you switch to other formats. • This function does not work in the following cases. - Linear PCM signals with a sampling frequency of more than 48 kHz are being received. - Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received. 12GB