Sony STR-DH520 Operating Instructions - Page 60

HDMI menu You can make the required settings for equipment connected to the HDMI jack. x CTRL.HDMI Lets you turn the Control for HDMI function on or off. For details, see ""BRAVIA" Sync Features" (page 47). x PASS.THRU Lets you output the HDMI signals to the TV even when the receiver is in standby mode. • ON When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver's HDMI TV OUT jack. • AUTO When the TV is turned on while the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI TV OUT jack. Sony recommends this setting if you use a "BRAVIA" Sync compatible Sony TV. This setting saves power in the standby mode when compared with the "ON" setting. • OFF The receiver does not output HDMI signals when in the standby mode. Turn on the receiver to enjoy the connected equipment's source on the TV. This setting saves power in the standby mode when compared with the "ON" setting. Notes • This parameter is not available when "CTRL.HDMI" is set to "CTRL OFF". • When "AUTO" is selected, it may take a little more time for the image and sound to be output to the TV than when "ON" is selected. • When the receiver is in standby mode, "A.STANDBY" appears on the display if "PASS.THRU" is set to "AUTO" or "ON". However, "A.STANDBY" will disappear when "PASS.THRU" is set to "AUTO" and no signals are detected. x AUDIO.OUT Lets you set the HDMI audio output from the playback equipment connected to the receiver via an HDMI connection. • AMP The HDMI audio signals from the playback equipment are only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. • TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback equipment depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play back multi channel source. • When you connect the receiver to an image display equipment (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". x H. ASSIGN Lets you reassign the HDMI input jack to other input source. For details, see "Using the sound/images from other inputs" (page 51). SYSTEM menu You can customize the settings of the receiver. x AUTO.STBY Lets you set the receiver switch to standby mode automatically when you do not operate the receiver or when there is no signals input to the receiver. • STBY ON Switches to standby mode after approximately 30 minutes. • STBY OFF Does not switch to standby mode. 60GB