Sony STR-DH520 Operating Instructions - Page 51
Advanced Operations, Switching between digital and analog audio (INPUT MODE) - hdmi ctrl off
UPC - 027242809369
View all Sony STR-DH520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Advanced Operations Switching between digital and analog audio (INPUT MODE) When you connect equipment to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch. 1 Press input button to select the input source. You can also use the INPUT SELECTOR on the receiver. 2 Press INPUT MODE repeatedly. The selected audio input mode appears on the display panel. • AUTO: Gives priority to digital audio signals when there are both digital and analog connections. If there are more than one digital connection, HDMI audio signals have priority. If there are no digital audio signals, analog audio signals are selected. When TV input is selected, priority is given to the Audio Return Channel (ARC) signals. If your TV is not compatible with the Audio Return Channel (ARC) function, the digital optical audio signals are selected. • COAX: Specifies the digital audio signals input to the DIGITAL COAXIAL jack. • OPT: Specifies the digital audio signals input to the DIGITAL OPTICAL jack. • ANALOG: Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Notes • Some audio input modes may not be set up based on the input. • When "A. DIRECT" is being used, audio input is set to "ANALOG". You cannot select other modes. • The Audio Return Channel (ARC) function does not work in the following cases. - Your TV is not compatible with the Audio Return Channel (ARC) function. - "CTRL.HDMI" is set to "CTRL OFF". - When you do not connect the receiver to the ARC compatible TV's HDMI jack via an HDMI cable. Using the sound/images from other inputs You can reassign the HDMI, COMPONENT VIDEO and DIGITAL input jacks to other input if the default settings of the jacks do not correspond to your connected equipment. After you have reassigned the input jacks, you can use the input button (or INPUT SELECTOR on the receiver) to select the equipment you connected. Example: When you connect the DVD player to the OPTICAL SAT/CATV IN and COMPONENT VIDEO SAT/CATV (IN 2) jacks. - Assign the OPTICAL SAT/CATV IN jack to "BD/DVD" - Assign the COMPONENT VIDEO SAT/CATV (IN 2) jacks to "BD/DVD" Note Before you reassign the HDMI input jacks, be sure to set "CTRL.HDMI" to "CTRL OFF". 1 Press AMP MENU. 2 Press V/v repeatedly to select "AUDIO", "VIDEO" or "HDMI", then press or b. Advanced Operations continued 51GB