Sony STR-DH520 Operating Instructions - Page 68

Other The Control for HDMI function does not work. • Check the HDMI connection (page 21, 22). • Make sure "CTRL.HDMI" is set to "CTRL ON" in the HDMI menu. • Make sure the connected equipment is compatible with the Control for HDMI function. • Check the Control for HDMI settings on the connected equipment. Refer to the operating instructions of the connected equipment. • When "CTRL.HDMI" is set to "CTRL OFF", the "BRAVIA" Sync does not work properly, even if a equipment is connected to the HDMI IN jack. • The types and the number of equipment which can be controlled by the "BRAVIA" Sync are restricted in the HDMI CEC standard as follows. - Recording equipment (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 equipment - Playback equipment (Blu-ray Disc player, DVD player, etc.): up to 3 equipment - Tuner-related equipment: up to 4 equipment - AV receiver (audio system): up to 1 equipment The TV's remote control cannot be used to control the connected equipment when using the Control for HDMI function. • Depending on the connected equipment and TV, you may need to set up the equipment and TV. Refer to the operating instructions supplied with each equipment and TV. • Change the input of the receiver to the HDMI input connected to the equipment. Error messages If there is a malfunction, a message appears on the display panel. You can check the condition of the system by the message. If any problem persists, consult your nearest Sony dealer. If an error message appears while you perform Auto Calibration, see "When error codes appear" (page 34) to solve the problem. PROTECT Irregular current is output to the speakers, or the receiver is covered and ventilation holes are blocked. The receiver will automatically turn off after a few seconds. Check the speaker connection and turn on the power again. Clearing the memory Reference sections To clear All memorized settings Customized sound fields See page 29 page 47 68GB