Sony STRDH830 Operating Instructions - Page 32
Preparing the Receiver, Initializing the receiver, Setting the speakers
View all Sony STRDH830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings. Be sure to use the buttons on the receiver to perform this operation. ?/1 Setting the speakers Selecting the speaker pattern Select the speaker pattern according to the speaker system which you are using. 1 Press GUI MODE. After "GUI ON" appears on the display panel for a while, the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. The "CLEARING" appears on the display panel for a while, then changes to "CLEARED". Changes or adjustments made to the settings are now reset to the defaults. 2 Press V/v repeatedly to select " Settings", then press or b. The Settings menu list appears on the TV screen. 32GB