Sony STRDH830 Operating Instructions - Page 65
Surround Settings menu, To output test tone from each, speaker, To adjust the effect type
View all Sony STRDH830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/- or 2 +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the TV screen during adjustment. To output test tone from each speaker You can output test tone from the speakers in sequence. 1 Select "Test Tone", then press or b. 2 Adjust the parameter, then press . • OFF • AUTO: The test tone is output from each speaker in sequence. 3 Adjust the speaker level, then press . x D.Range Comp (Dynamic range compression) Lets you compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. • MAX: The dynamic range is compressed dramatically. • STD: The dynamic range is compressed as intended by the recording engineer. • AUTO: The dynamic range is applied automatically with Dolby TrueHD source or other source is set to "OFF". • OFF: The dynamic range is not compressed. Tip "STD" is the standard setting, and enacts light compression. Therefore, we recommend using the "MAX" setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression. x Distance Unit Lets you select the unit of measurement for setting distances. • FEET: The distance is displayed in feet. • METER: The distance is displayed in meters. Surround Settings menu You can select the sound field and adjust the effect level, etc. on the "Sound Field Setup" screen. For details on the sound field, see "Enjoying Sound Effects" (page 51). Note The setup items you can adjust on each menu vary depending on the sound field. To adjust the effect type for HD-D.C.S. 1 Select "HD-D.C.S.", then press or b. 2 Select the effect you want, then press . HD-D.C.S. has three different types: Theater, Dynamic and Studio. Each type has different reflection and reverberation sound mixture levels and is optimized to match a listener's room uniqueness, taste and mood. • Dynamic Want to enjoy the sound effects to the full extent, just like at the movie theaters? Dynamic type emphasizes on the reflection sound. Without HD-D.C.S., many rooms are often somewhat reverberant but lack a spacious feeling. This type acoustically opens up those types of rooms and provides a spacious and dynamism feeling equivalent to a mastering studio. Adjusting Settings continued 65GB