Sony STRDH830 Operating Instructions - Page 55
Using Advanced Auto Volume function, Resetting sound fields to the default settings
View all Sony STRDH830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Using Advanced Auto Volume function This receiver can adjust the volume automatically depending on the input signal or content from the connected equipment. This function is useful, for example, when the sound of a commercial is louder than the TV programs. Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. ?/1 AUTO VOL Press AUTO VOL to select "A.VOL ON". The advanced auto volume function is set to on and off as you press AUTO VOL. Notes • Be sure to reduce the volume level before you turn on/off this function. • As this function is available only when Dolby Digital, DTS or Linear PCM signals are input, the sound may suddenly increase when you switch to other formats. • This function does not work in the following cases. - Linear PCM signals with a sampling frequency of more than 48 kHz are being received. - Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received. MUSIC 1 Press ?/1 to turn off the receiver. 2 While holding down MUSIC, press ?/1. "S.F. CLEAR" appears on the display panel and all sound fields are reset to their default setting. Enjoying Sound Effects 55GB