Sony STRDH830 Operating Instructions - Page 82

Specifications, AUDIO POWER

Page 82 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 95 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section USA model1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 95 W + 95 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 105 W + 105 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 140 W per channel Canada, Europe, Mexico, Australia and Taiwan models1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 85 W + 85 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 105 W + 105 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 140 W per channel 1)Measured under the following conditions: Area Power requirements USA, Canada, Taiwan 120 V AC, 60 Hz Mexico 127 V AC, 60 Hz Europe, Australia 230 V AC, 50 Hz 2)Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog 10 Hz - 70 kHz, +0.5/-2 dB (with sound field and equalizer bypassed) Input Analog Sensitivity: 500 mV/ 50 kilohms S/N3): 96 dB (A, 500 mV4)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (Analog) AUDIO OUT Voltage: 500 mV/ 1 kilohm SUBWOOFER Voltage: 2 V/1 kilohm Equalizer Gain levels ±6 dB, 1 dB step 3)INPUT SHORT (with sound field and equalizer bypassed). 4)Weighted network, input level. FM tuner section Tuning range 87.5 MHz - 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced AM tuner section Tuning range Area Tuning scale 10 kHz step 9 kHz step USA, Canada, Mexico 530 kHz - 531 kHz - 1,710 kHz 1,710 kHz Europe, Australia, - Taiwan 531 kHz - 1,602 kHz Antenna (aerial) Loop antenna (aerial) 82GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

82
GB
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
USA model
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
95 W + 95 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
105 W + 105 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz, THD 10%)
140 W per channel
Canada, Europe, Mexico, Australia and Taiwan
models
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
85 W + 85 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
105 W + 105 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz, THD 10%)
140 W per channel
1)
Measured under the following conditions:
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog
Sensitivity: 500 mV/
50 kilohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT
Voltage: 500 mV/
1 kilohm
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
±6 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
AM tuner section
Tuning range
Antenna (aerial)
Loop antenna (aerial)
Area
Power requirements
USA, Canada,
Taiwan
120 V AC, 60 Hz
Mexico
127 V AC, 60 Hz
Europe, Australia
230 V AC, 50 Hz
Area
Tuning scale
10 kHz step
9 kHz step
USA, Canada,
Mexico
530 kHz –
1,710 kHz
531 kHz –
1,710 kHz
Europe, Australia,
Taiwan
531 kHz –
1,602 kHz