Sony STRDH830 Operating Instructions - Page 47
Recording using the receiver, USB message list
View all Sony STRDH830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Basic Operations • Some time may be needed to start playback when: - the folder structure is complex. - the memory capacity is excessive. • This receiver does not necessarily support all the functions provided in a connected USB device. • The playback order for the receiver may differ from the playback order of the connected USB device. • Folders that have no audio files are skipped. • When playing a very long track, some operations may cause playback delay. USB message list Message and explanation Reading The receiver is recognizing and reading information of the USB device. Device Error The memory of the USB device could not be recognized (page 45). No Support An unsupported USB device is connected, an unknown device is connected, or the USB device is connected through a USB hub (page 45). No Device No USB device is connected or the connected USB device is not recognized. No Track No track was found. Recording using the receiver You can record from an audio/video equipment using the receiver. Refer to the operating instructions supplied with your recording equipment. 1 Prepare the source for playing. Use the input button (or INPUT SELECTOR on the receiver) to select the source. For example, select SAT/CATV. 2 Prepare the recording equipment. Insert a blank video tape, etc. into the recording equipment (connected to VIDEO 1 OUT jacks). 3 Start recording on the recording equipment, then start the playback equipment. Notes • Some sources contain copyright protection to prevent recording. In this case, you may not be able to record from the source. • Audio and video input signals via HDMI IN, COMPONENT VIDEO IN and DIGITAL IN jacks cannot be recorded. • While only composite video signals are being recorded, the auto standby function of the receiver may start up and interrupt the recording. In this case, set the "Auto Standby" to "OFF" (page 67). 47GB