Sony TC-WE605S Operating Instructions - Page 13

Advanced Recording Operations Fading In and Out (Fader) You can gradually increase the recording level at the beginning of a recording (fade in) or gradually decrease the recording level at the end of a recording (fade out). It is convenient to use this function, for example, when the tape reaches to its end and you don't want the track to be cut off abruptly. POWER DIRECTION MODE A a RELAY ØON øOFF PITCH CONTROL - + RESET MEMORY A COUNTER B RESET MEMORY g RMS/START RMS SET CHECK - RMS + DISPLAY 0(AMS) (AMS)) AUTO CAL(STARTP) DECK A DECK B 0(AMS) DUBBING A B A+B REC HIGH/NORMAL START(DECK BP) (AMS)) p CLEAR ª BACK PAUSE REC MUTE REC PRr · p FRONT DOLBY NR OFF ON ON FILTER B C S ª· PAUSE REC MUTE REC PRr § § FADER AUTO 4 3 REC LEVEL 5 6 7 2 8 1 0 9 10 FADER ARL π SYNCHRO PHONES To Fade in Fade out Do the following: 1 Follow Steps 1 to 4 of "Recording on a Tape" on page 6. 2 Press FADER. During fade-in, the AUTO indicator flashes. When the fade-in has completed, the AUTO indicator lights up if the Auto Rec Level function is working, or goes off if the Auto Rec Level function is not working. Press FADER when you want to start fading out while recording. When the fade-out has completed, "REC" flashes in the display and the deck pauses. Note Fade-in or fade-out is not possible when you have used REC LEVEL to manually set the recording level to 0 (minimum) (see page 7). Dubbing a Tape You can copy a tape in deck A to a tape in deck B at normal or high speed. DIRECTION MODE ª / · HIGH / NORMAL POWER DIRECTION MODE A a RELAY ØON øOFF PITCH CONTROL - + RESET MEMORY A COUNTER B RESET MEMORY g RMS/START RMS SET CHECK - RMS + DISPLAY 0(AMS) (AMS)) AUTO CAL(STARTP) DECK A DECK B 0(AMS) DUBBING A B A+B REC HIGH/NORMAL START(DECK BP) (AMS)) p CLEAR ª BACK PAUSE REC MUTE REC PRr · p FRONT DOLBY NR OFF ON ON FILTER B C S ª· PAUSE REC MUTE REC PRr § § AUTO 4 3 REC LEVEL 5 6 7 2 8 1 0 9 10 FADER ARL π SYNCHRO PHONES p PAUSE P 1 Insert the recorded cassette into deck A and a blank cassette into deck B. Make sure the record-protect tabs on the cassette in deck B have not been removed. 2 Select the side(s) to be recorded on. To record on One side Both sides Set DIRECTION MODE to A a. Recording on the reverse side on deck B starts independently of playback on deck A. RELAY. Recording on the reverse side on deck B starts simultaneously with playback of the reverse side on deck A. 3 Select the dubbing speed. To select Press HIGH/NORMAL Normal speed Once High speed Twice "HIGH" or "NORM" appears in the display. The tape deck changes to dubbing standby. 4 Select the side from which to start dubbing. To record from Press The front side · The reverse side ª 5 Press PAUSE P on deck B to start dubbing. To stop dubbing During Normal-speed dubbing High-speed dubbing Press p on deck B p on either deck 13 3-810-716-11(1)