Sony TC-WE605S Operating Instructions - Page 17
Advanced Recording Operations, To stop CD Synchro-Recording
![]() |
View all Sony TC-WE605S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Advanced Recording Operations 7 Press SYNCHRO. If your CD player has the Peak Search function: The SYNCHRO button indicator lights up and the CD player locates the highest signal level among the tracks to be recorded as the tape deck adjusts the recording level. When the recording level adjustment is completed, CD Synchro-Recording starts. If your CD player does not have the Peak Search function: The CD player changes to play pause and deck B to recording pause. Press PAUSE P on deck B to start Synchro-Recording. To stop CD Synchro-Recording Press p on deck B or the CD player. z You can use an optional remote to operate the CD player To start CD play, press P twice; to pause CD play, press P once; to locate a CD track, press = or +. z If the SYNCHRO button indicator goes off after flashing three times The tape cannot be recorded on because the recordprotect tab(s) on the cassette has (have) been removed. z Length of tape used for recording Tracks on a CD differ in length. Classical music CDs and others often have tracks that exceed the recording time of a single cassette side. In this case, record the tape manually. z When recording from the middle of the tape A tape that is inserted and has not been played or recorded on is assumed by the deck to be a new tape, even if the present location is in the middle of the tape. The deck will transport the tape for 10 seconds before starting CD Synchro-Recording to bypass the portion corresponding with the leader. To begin CD SynchroRecording without the ten-seconds delay, play or record on the tape for a few seconds before starting the CD Synchro-Recording procedure. z If the tape ends during CD Synchro-Recording on the front side of the tape (· lights up) and DIRECTION MODE is set to a or RELAY Recording of the track ends immediately, the tape direction is reversed, and recording starts again from the beginning of the track. If the tape ends on the reverse side of the tape (ª lights up), CD SynchroRecording stops and the CD player stops playing. Notes • To prevent interruption of the recording process, do not press any operation buttons on the CD player during CD Synchro-Recording. • Certain operation buttons on the tape deck are disabled during CD Synchro-Recording. 17 3-810-716-11(1)
![](/manual_guide/products/sony-tcwe605s-operating-instructions-f9407de/17.png)