Sony TC-WE605S Operating Instructions - Page 7

Basic Operations z To protect recordings against accidental erasure Break out the record-protect tab(s) (see page 18). 5 Press PAUSE P or ·. Recording starts. 6 Start playing the program source. Basic Operations To Stop recording Start recording from the reverse side Pause Take out the cassette Press p ª twice in Step 5 PAUSE P. Press the button again to resume recording. § after stopping recording z The Dolby HX PRO* system automatically works during recording Distortion and noise in the high-frequency response are reduced to produce highquality sound that can be enjoyed even during playback on other tape decks. Use these switches (controls) to perform additional operations ESET MEMORY A COUNTER B RESET MEMORY g RMS/START RMS SET CHECK - RMS + DISPLAY 0(AMS) (AMS)) AUTO CAL(STARTP) DECK A DECK B 0(AMS) DUBBING A B A+B REC HIGH/NORMAL START(DECK BP) (AMS)) p CLEAR ª BACK PAUSE REC MUTE REC PRr · p FRONT DOLBY NR OFF ON ON FILTER B C S ª· PAUSE REC MUTE REC PRr § § AUTO 4 3 REC LEVEL 5 6 7 2 8 1 0 9 10 FADER ARL π SYNCHRO PHONES DOLBY NR REC LEVEL To record with the Dolby NR system Set DOLBY NR to ON, and select B, C, or S (unavailble on the TC-WE505) before you start recording. To record FM broadcasts with the Dolby NR system If the FM reception is unsatisfactory, set DOLBY NR to ON FILTER (multiplex filter) (see page 22). * HX Pro headroom extension originated by Bang & Olufsen and manufactured under license from Dolby Laboratories Licensing Corporation. To adjust the recording level manually After pressing REC rin Step 4 on page 6, turn REC LEVEL so that the peak level meters reach the recommended level for the corresponding tape type. After completing the adjustments, stop playing the program source, then continue the procedure from Step 5. LdB -∞ -30 -20 -10 R -4 a 0 +4 +8 For type I or type II tape For type IV tape "DOLBY", the double-D symbol a and "HX PRO" are trademarks of Dolby Laboratories Licensing Corporation. 7 3-810-716-11(1)