Sony TC-WE605S Operating Instructions - Page 16

Advanced Recording Operations Inserting a Blank Space During Recording (Record Muting) You can insert a blank space of 4 seconds between each track. The blank spaces allow you to locate the start of specific tracks afterwards using the Multi-AMS function (see page 8). You can also use this function to erase unwanted portions on a tape. PAUSE P POWER DIRECTION MODE A a RELAY ØON øOFF PITCH CONTROL - + RESET MEMORY A COUNTER B RESET MEMORY g RMS/START RMS SET CHECK - RMS + DISPLAY 0(AMS) (AMS)) AUTO CAL(STARTP) DECK A DECK B 0(AMS) DUBBING A B A+B REC HIGH/NORMAL START(DECK BP) (AMS)) p CLEAR ª BACK PAUSE REC MUTE REC PRr · p FRONT DOLBY NR OFF ON ON FILTER B C S ª· PAUSE REC MUTE REC PRr § § AUTO 4 3 REC LEVEL 5 6 7 2 8 1 0 9 10 FADER ARL π SYNCHRO PHONES REC MUTE R 1 Start recording. 2 Press REC MUTE R where you want to insert a blank space. "REC" flashes in the display and a blank is recorded on the tape. After 4 seconds, P lights up and the tape deck changes to recording pause. 3 Press PAUSE P to resume recording. z If you want to insert a blank space longer than 4 seconds Hold down REC MUTE R as long as you want. After 4 seconds, "REC" flashes faster. When you release REC MUTE R, P lights up and the tape deck changes to recording pause. Press PAUSE P to resume recording. Synchro-Recording With a CD Player Through a Control A1 Cable (TC-WE805S/WE705S/WE605S only) By pressing SYNCHRO, you can perform synchrorecording on your tape deck with a Sony CD player connected to the CONTROL A1 connector through a control A1 cable (see page 4). The control A1 cable supports advanced functions not possible with the commander-based CD synchro-recording function on previous models. Further information on the various operations made possible by a control A1 cable is provided in the pamphlet attached to this manual. DIRECTION MODE ª / · SYNCHRO POWER DIRECTION MODE A a RELAY ØON øOFF PITCH CONTROL - + RESET MEMORY A COUNTER B RESET MEMORY g RMS/START RMS SET CHECK - RMS + DISPLAY 0(AMS) (AMS)) AUTO CAL(STARTP) DECK A DECK B 0(AMS) DUBBING A B A+B REC HIGH/NORMAL START(DECK BP) (AMS)) p CLEAR ª BACK PAUSE REC MUTE REC PRr · p FRONT DOLBY NR OFF ON ON FILTER B C S ª· PAUSE REC MUTE REC PRr § § AUTO 4 3 REC LEVEL 5 6 7 2 8 1 0 9 10 FADER ARL π SYNCHRO PHONES 1 Set the source selector on the amplifier to CD player. 2 Insert a CD into the CD player. 3 Select the play mode (CONTINUE, SHUFFLE, or PROGRAM) of the CD player. 4 Insert a cassette into deck B. 5 Select the side(s) to be recorded on. To record on Set DIRECTION MODE to Only one side A Both sides a or RELAY 6 Select the side you want to start recording from on deck B. To record from Press The front side · The reverse side ª 16 3-810-716-11(1)