Sony TC-WE605S Operating Instructions - Page 14

Advanced Recording Operations z During high-speed dubbing Only p is operative. z You don't have to adjust the recording level or select the Dolby NR system during dubbing Dubbing is automatically performed with the same recording level and Dolby NR system as the original in deck A. If, however, you want to monitor the sound during normal-speed dubbing, set DOLBY NR to match the tape in deck A (see page 5). z You can adjust the pitch of the playback on deck A (TC-WE805S/WE705S/WE505 only) See page 5. Note If a TV set is placed near the tape deck, noise may occur during high-speed dubbing. In that case, turn the television set off or move it away from the tape deck. Dubbing only specific portions You can do this only during the normal-speed dubbing. 1 Press p on deck A at the portion you want to skip. Deck B changes to recording pause. 2 Locate the point you want to resume recording on deck A, then stop the tape. 3 Press PAUSE P on deck B to resume dubbing. Recording on Both Decks in Succession (Relay Recording) (TC-WA8ESA/WE805S only) You can make a continuous recording that starts on a cassette in deck A and ends on a cassette in deck B. DIRECTION MODE ª / · REC r POWER DIRECTION MODE A a RELAY ØON øOFF PITCH CONTROL - + RESET MEMORY A COUNTER B RESET MEMORY g RMS/START RMS SET CHECK - RMS + DISPLAY 0(AMS) (AMS)) AUTO CAL(STARTP) DECK A DECK B 0(AMS) DUBBING A B A+B REC HIGH/NORMAL START(DECK BP) (AMS)) p CLEAR ª BACK PAUSE REC MUTE REC PRr · p FRONT DOLBY NR OFF ON ON FILTER B C S ª· PAUSE REC MUTE REC PRr § § AUTO 4 3 REC LEVEL 5 6 7 2 8 1 0 9 10 FADER ARL π SYNCHRO PHONES 1 Insert blank cassettes into both decks. Make sure that record-protect tabs on the cassettes have not been removed. 2 Select the Dolby NR system (see page 7). 3 Set DIRECTION MODE to RELAY. 4 Press REC r on deck A. Deck A changes to recording pause. 5 Start playing the program source. 6 Adjust the recording level manually, if necessary (see page 7). 7 Start recording. To record from The front side The reverse side Press · on deck A ª on deck A To stop Relay Recording During Recording on deck A Recording on deck B Press p on deck A p on deck B Note Make sure that · on deck B appears in the display. If it doesn't, press · on deck B once; otherwise, Relay Recording stops when the reverse side of the cassette in deck B finishes. 14 3-810-716-11(1)