Sony XCDSX90 User Manual (XCDV60_V60CR_SX90_SX90CR_U100_U100CR_Technical_Manua - Page 6
Location and Function of Parts and Operation, Front/Top/Bottom, Rear
View all Sony XCDSX90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Overview Location and Function Rear of Parts and Operation Front/Top/Bottom 1 Lens mount (C-mount) Attach any C-mount lens or other optical equipment. Note The lens must not project more than 10 mm (13/32 inch) from the lens mount. 1 Lens mount face 210 mm (13/32 inch) or less 2 Auxiliary holes (top) 3 Reference holes (bottom) These precision screw holes are for locking the camera module. Locking the camera module into these holes secures the optical axis alignment. For details, see "Dimensions" on page 37. Four screw reference holes 3 can be used as the tripod adaptor screw holes, too. Screw the VCTST70I tripod adaptor into the four screw holes when you use a tripod. 4 IEEE1394b connectors Connect an IEEE1394b camera cable (not supplied) to this connector. Pin No. 1 2 3 4 5 Signal TPB- TPB+ TPA- TPA+ TPAG Pin No. Signal 6 VG 7 NC 8 VP 9 TPBG 5 12-pin I/O connector When power from the IEEE1394b connector is insufficient, power is supplied through this connector. Connect a camera cable such as the CCXC-12P05N to this connector. Pin No. 1 2 3 4 5 6 Signal Power GND Power IN ISO GND Strobe OUT GPIO OUT 1- GPIO OUT 1+ Pin No. Signal 7 GPIO IN 2 8 GPIO OUT 2- 9 GPIO OUT 2+ 10 GPIO IN 1 11 Trigger IN 12 ISO GND 6