Stihl FS 490 C-M Instruction Manual - Page 21

Cutting Attachments Mowing heads 1 STIHL SuperCut 40-2 2 STIHL AutoCut 40-2 3 STIHL AutoCut 40-4 4 STIHL AutoCut 46-2 5 STIHL TrimCut 41-2 6 STIHL DuroCut 40-4 7 STIHL PolyCut 41-3 Metal cutting attachments 8 Grass cutting blade 230-4 (230 mm dia.) 9 Grass cutting blade 255-8 (255 mm dia.) 10 Grass cutting blade 250-44 (250 mm dia.) 11 Brush knife 300-3 (300 mm dia.) 12 Scratcher tooth circular saw blade 200 (200 mm dia.) 13 Chisel tooth circular saw blade 20022 (4119), chisel tooth circular saw blade 200-22 HP (4000) 14 Scratcher tooth circular saw blade 225 (225 mm dia.) 15 Chisel tooth circular saw blade 225 (225 mm dia.) Deflectors, Limit Stops 16 Deflector for mowing heads 17 Deflector for metal cutting attachments, items 8 to 11 18 Limit stop for circular saw blades, items 12 and 13 19 Limit stop for circular saw blades, items 14 and 15 Harness 20 Full harness must be used WARNING Based on the cutting attachment being used: Choose the proper deflector in order to reduce the risk of injury from thrown objects and contact with the cutting attachment. Make sure your unit is equipped with the proper handle and harness in order to reduce the risk of injury from loss of control and contact with the cutting attachment. Use grass cutting metal blades, brush knifes and circular saw blades on this unit only if equipped with a bike handle. Do not use rigid polymer blades on this unit. English Mounting the Bike Handle Mounting Bike Handle with Swivelling Handle Support 1 3BA003 KN Do not rotate the control handle (1) between unpacking and mounting it on the handlebar; see also chapter on "Adjusting the Throttle Cable". 4 2 The machine is shipped with the clamp moldings (4) mounted on the handlebar (2). N Do not change the position of the clamp moldings on the handlebar until the control handle is mounted. 3BA004 KN WARNING Non-metal grass cutting blades, brush knives and circular saw blades are not approved. FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L 19