Stihl FS 490 C-M Instruction Manual - Page 23

13 1 Adjusting the Handlebar Opening the wing screw English 3BA012 KN 3BA026 KN 3BA027 KN 3BA028 KN N Fold the grip of the wing screw down so that it is flush. Mounting the Control Handle 11 N Swing the control handle (1) behind the handlebar so that the throttle trigger (13) is facing up. 14 2 13 14 1 N Raise the grip of the wing screw to the upright position. 002BA458 KN 1 12 N Take out the screw (11) and remove the nut (12) from the control handle (1). 1 002BA451 KN N Push the control handle (1) in this position onto the end of the handlebar (2) until the holes (14) are in alignment - the throttle trigger (13) points up. 12 1 N Turn the wing screw counterclockwise until the handle support can be moved. Line up the handlebar 11 002BA459 KN 3BA011 KN N Pass the control handle (1) under the drive tube and put it down on the right-hand side of the machine. N Fit the nut (12) in the control handle (1), insert the screw (11) and tighten it down firmly. N Move the handlebar to the required position. 6BA007 KN FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L 21