Stihl FS 490 C-M Instruction Manual - Page 24
Closing the wing screw, Checking the Throttle Cable, Swiveling the Handlebar, Transport position,
View all Stihl FS 490 C-M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English A Swiveling the Handlebar Transport position 6BA006 KN 2 N Fold the grip of the wing screw down so that it is flush. 28 Checking the Throttle Cable N Position the handlebar (2) so that distance A is about 17 cm (7 in). Do not clamp the curved part of the handlebar. Closing the wing screw 3BA014 KN N After mounting the control handle, check the throttle cable - see chapter on "Adjusting the Throttle Cable". 6BA005 KN N Rotate the wing screw clockwise until it becomes difficult to turn. N Tighten down the wing screw firmly. N Loosen the wing screw (8) and unscrew it until the handlebar (2) can be turned clockwise. N Turn the handlebar 90° and then swing the handles down. N Tighten down the wing screw (8) firmly. Working position N Reverse the sequence described above to swing the handles up and turn the handlebar counterclockwise. 3BA025 KN 22 FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L