Stihl FSA 90 R Instruction Manual - Page 27
Replacing Nylon Line
View all Stihl FSA 90 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Adjusting Nylon Line STIHL SuperCut Fresh line is advanced automatically if the remaining line is at least 6 cm (2 1/2 in) long. The blade on the deflector trims overlong lines to the correct length. STIHL AutoCut N With the engine running, hold the rotating mowing head above the grass surface. N Tap it on the ground once - fresh line is advanced and the blade on the deflector trims it to the right length. Fresh line is advanced every time the mowing head is tapped on the ground. For this reason observe the mowing head's cutting performance during operation. If the mowing head is tapped on the ground too often, the line limiter blade will unnecessarily cut off unused lengths of nylon line. Line feed operates only if both lines are still at least 2.5 cm (1 in) long. Replacing Nylon Line STIHL DuroCut WARNING Before fitting fresh lines in the mowing head, set the retaining latch to ƒ and remove the battery - this helps reduce the risk of injury. N Fit nylon line in the mowing head as described in the instructions supplied. FSA 90 R English 25