Stihl HT 101 Product Instruction Manual - Page 22
Opening the toolless filler cap, Refueling, Closing the toolless filler cap, Opening the threaded - accessories
![]() |
View all Stihl HT 101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
200BA421 KN English Threaded filler cap Opening the toolless filler cap N Swing the grip into an upright position. 249BA053 KN 002BA419 KN Refueling Take care not to spill fuel while fueling, and do not overfill the tank. STIHL recommends use of the STIHL filling system (special accessory). Closing the toolless filler cap described above must be repeated. See also the "Toolless cap with grip" section in the Safety Precautions. Opening the threaded filler cap 249BA055 KN N Position the cap with the grip in an upright position; the raised positioning marks must line up. N Turn cap clockwise as far as it will go (approx. 1/4 turn). N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. STIHL recommends use of the STIHL filling system (special accessory). 249BA056 KN 249BA054 KN N Turn the cap counterclockwise (approx. 1/4 turn). N Remove the filler cap. N Fold the grip down so that it is flush with the surface. If the grip is not flush with the surface and the lug on the clip does not engage entirely in the recess (arrow), the cap is not properly closed and the steps 20 HT 100, HT 101, HT 130, HT 131
![](/manual_guide/products/stihl-ht-100-product-instruction-manual-ca803a1/22.png)