Stihl HT 101 Product Instruction Manual - Page 46
Clamp Screw HT 101, HT 131 - harness
View all Stihl HT 101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
English Definitions 1 Handle Hose (HT 100, HT 130) For holding and controlling the unit with the hand during operation. 2 Fixed Drive Tube (HT 100, HT 130) Encloses and protects the drive shaft between the engine and gearbox. 3 Carrying Ring Connects the unit to the harness. 4 Slide Control For starting throttle, run and stop. Keeps the choke partially open during starting and switches off the ignition to stop the engine. 5 Throttle Trigger Lockout Must be depressed before the throttle trigger can be activated. 6 Throttle Trigger Controls the speed of the engine. 7 Spark Plug Boot Connects the spark plug with the ignition lead. 8 Choke Knob Eases engine starting by enriching mixture. 9 Air Filter Cover Covers and protects the air filter element. 10 Fuel Tank For fuel and oil mixture. 11 Machine Support For resting machine on the ground. 12 Machine Support (HT 130, HT 131) For resting machine on the ground. 13 Oilomatic Saw Chain A loop consisting of cutters, tie straps and drive links. 14 Guide Bar Supports and guides the saw chain. 15 Oil Tank Tank for chain lubricating oil. 16 Oil Filler Cap For closing the oil tank. 17 Telescopic Drive Tube (Shaft) (HT 101, HT 131) Adjustable drive tube enables user to optimize machine's reach. 18 Clamp Screw (HT 101, HT 131) For adjusting the length of the telescopic drive tube. 19 Chain Sprocket Cover Covers the clutch and chain sprocket. 20 Hook For hooking the machine to a branch and pulling branches away. 21 Chain Guard (Scabbard) To protect the operator from touching the chain. 22 Chain Sprocket The toothed wheel that drives the saw chain. 23 Chain Tensioner Permits precise adjustment of chain tension. 24 Fuel Filler Cap For closing the fuel tank. 25 Carburetor Adjusting Screws For tuning the carburetor. 26 Fuel Pump Provides additional fuel feed for a cold start. 27 Starter Grip The grip of the pull starter, for starting the engine. 28 Muffler (with Spark Arresting Screen) Muffler reduces exhaust noises and diverts exhaust gases away from operator. Spark arresting screen is designed to reduce the risk of fire. 44 HT 100, HT 101, HT 130, HT 131