Stihl MS 193 C-E Product Instruction Manual - Page 28
Mounting the Bar and Chain
View all Stihl MS 193 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
142BA059 KN English Chain scabbard Mounting the Bar and Chain Mounting the guide bar Releasing the chain brake 7 001BA244 KN 4 8 Your saw comes standard with a chain scabbard that matches the cutting attachment. If you use guide bars of different lengths on the saw, the length of the chain scabbard must be matched to the guide bar to reduce the risk of injury. It should cover the full length of the guide bar. The length of the matching guide bars is marked on the side of the chain scabbard. N Pull the hand guard (4) toward the handle until there is an audible click - the chain is disengaged. Removing the chain sprocket cover 6 5 N Unscrew the nut (5) and remove the cover (6). 142BA058 KN 151BA002 KN N Turn the screw (7) counterclockwise until the tensioner slide (8) butts against the left end of the housing slot. 9 10 N Fit the guide bar over the stud (9) and engage the peg of the tensioner slide in the hole (10). Fitting the chain WARNING Wear work gloves to protect your hands from the sharp cutters. 142BA060 KN 26 MS 193 C