Stihl MS 193 C-E Product Instruction Manual - Page 34
Checking Chain Lubrication, Chain Brake
View all Stihl MS 193 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
English If the oil level in the tank does not go down, the reason may be a problem in the oil supply system: Check chain lubrication, clean the oilways, contact your dealer for assistance if necessary. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. Checking Chain Lubrication Chain Brake Locking chain with chain brake 143BA024 KN 151BA004 KN The saw chain must always throw off a small amount of oil. NOTICE Never operate your saw without chain lubrication. If the chain runs dry, the whole cutting attachment will be irretrievably damaged within a very short time. Always check chain lubrication and the oil level in the tank before starting work. Every new chain has to be broken in for about 2 to 3 minutes. After breaking in the chain, check chain tension and adjust if necessary - see "Checking Chain Tension". - in an emergency - when starting - at idling speed The chain is stopped and locked when the hand guard is pushed toward the bar nose by the left hand - or when brake is activated by inertia in certain kickback situations. 32 MS 193 C