Synology SA3400 Recovery Media Creation Guide - Page 7
Create ISO Recovery Media, Boot Recovery Media
View all Synology SA3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Method 1: Automatically Create Recovery Media Boot Recovery Media 1. After recovery media has been created, a message will appear on the progress bar at the bottom of the tool. 2. Click Finish to open the directory for storing the ISO image. You can either mount the image onto the virtual machine intended for restoration, or burn the image onto a disk by using a third-party tool and insert the disk into the device that you want to restore. 3. Reboot the device and press F2 to enter the BIOS mode. This hotkey may vary according to different vendors. 4. Navigate to the Boot tab and prioritize the order of Removable Devices (for USB). 5. Exit the setup process and you will be directed to Synology Active Backup for Business Recovery Wizard, which will start the recovery process automatically. Note: Synology Active Backup for Business Recovery Wizard does not need to be additionally installed as it is embedded in Synology Active Backup for Business Recovery Media Creator. Create ISO Recovery Media System volume of at least 2.5 GB is required for creating recovery media in ISO format because creating an ISO image itself will occupy 1 GB, and the temporary files will occupy the remaining 1.5 GB. Afterward, launch Synology Active Backup for Business Recovery Media Creator and select ISO media. 05