TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.20 - Page 13

DA-6400/DA-6400dp Assigning takes to playlist entries (ASSIGN) 1. Load the playlist to which you want to assign takes, and open the playlist entry list screen. Inserting playlist entries (INSERT) You can insert an empty entry. 1. Open the playlist entry list screen. 2. Turn the MULTI JOG dial to select the entry to which you want to assign a take, and press the MULTI JOG dial to open the menu. 2. Turn the MULTI JOG dial to select the position where you want to create an empty entry, and press the MULTI JOG dial to open the menu. 3. Select ASSIGN, and press the MULTI JOG dial to open the ASSIGN TAKE screen. 3. Select INSERT, and press the MULTI JOG dial to insert an empty entry at the selected position. 4. Select the take that you want to assign on the ASSIGN TAKE screen. Select files and move between directories in the same way as on the BROWSE screen. NOTE To cancel an ASSIGN operation, press the EXIT [PEAK CLEAR] button to open the following pop-up message. NOTE If a take has been assigned to entry 999, which is the last possible playlist entry, the following pop-up message will appear. Press the MULTI JOG dial to return to the playlist entry list screen. Press the EXIT [PEAK CLEAR] button to close the pop-up message. 5. Press the MULTI JOG dial to open the menu. Press the MULTI JOG dial to delete entry 999 and insert an empty entry at the selected position. Press the EXIT [PEAK CLEAR] button to close the pop-up message without inserting an empty entry. 6. Select ASSIGN, and press the MULTI JOG dial to return to the playlist entry list screen and assign the selected take to the selected entry. TASCAM DA-6400/DA-6400dp 13