TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.20 - Page 19

DA-6400/DA-6400dp Inputting names for theater play playback range marks Use the following procedures to easily input the names of marks used for playback ranges in the theater play. 1. When the home screen is open, turn the MULTI JOG dial to select the take for which you want to set the playback range. 2. Press the INFO button while pressing and holding the SHIFT button to open the MARK INFO screen. 3. Select the mark that you want to set as the starting or ending point for the playback range. 4. Press the MULTI JOG dial to open the menu, and select EDIT NAME. 7. Turn the MULTI JOG dial to select the mark name you want to input. 8. Press the MULTI JOG dial to input the selected mark name and return to the MARK INFO screen. NOTE Rather than using PRESET5, you can input the characters for "$START", "$STANDBY" or "$END" the normal way. Showing marks for theater play playback ranges When the Home Screen is open, use the following procedure to show marks for theater play playback ranges. 5. Press the MULTI JOG dial to open a screen where you can edit the name of the selected mark. 6. Turn the MULTI JOG dial to move the cursor to PRESET5, and press the MULTI JOG dial to open a pull-up menu. Mark name $START $STANDBY $END Mark (white t) (blue t) (blue g) AUTO READY function added An AUTO READY function has been added. After a take completes playback, this puts the unit into playback standby at the beginning of the next take. Settings are made with the AUTO READY item added to the PLAY SETUP menu page. MODE This sets the AUTO READY function operation mode. Option OFF: ON: This disables the AUTO READY function. This enables the AUTO READY function. TASCAM DA-6400/DA-6400dp 19