TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.20 - Page 29

DA-6400/DA-6400dp New functions in firmware version 1.30 The following new functions have been added in firmware version 1.30. 00DA-6400 Control iPad remote control app support added 00TASCAM IF-AE16 AES/EBU interface card support added 00Function added to synchronize with SMPTE timecode and play the current take 00VAMPING mode added to repeat playback function modes 00Function added to set the input and output signal routing for each individual channel 00On/off setting added for NO SIGNAL error checking function 00Function added that requires pressing and holding the button to stop recording TASCAM DA-6400 Control iPad remote control app support added The TASCAM DA-6400 Control iPad remote control app is now supported. TASCAM IF-AE16 AES/EBU interface card support added The TASCAM IF-AE16 AES/EBU interface card is now supported. If installed in SLOT 1 or SLOT 2 of this unit, the following appears on the SLOT1 or SLOT2 menu page. CLOCK LINE If the slot with the IF-AE16 card installed is selected to be the clock master for the unit, this selects the signal line to use as the clock master. Options: A ES 1-2 (default), AES 3-4, AES 5-6, AES 7-8, AES 9-10, AES 11-12, AES 13-14, AES 15-16 NOTE ii When the slot with the IF-AE16 card installed is selected to be the clock master, you can also set the CLOCK LINE item on the CLOCK screen that opens from the GENERAL page CLOCK MASTER item. Moreover, if the slot with the IF-AE16 installed is selected to be the clock master, you can also change the setting by moving the cursor to APPLY and pressing the MULTI JOG dial. ii If the SRC item is set to ON for a signal line, it cannot be selected as the master clock In this case, the following pop-up window appears. A confirmation pop-up message appears.A confirmation pop-up message appears. SRC This turns the sample rate converter on/off for each signal line Options: OFF (default value), ON NOTE ii SRC cannot be set to ON for the signal line selected as the master clock. In this case, the following pop-up window appears.A confirmation pop-up message appears. ii If an IF-AE16 is installed, depending on the main unit SRC item setting and clock master setting, an error described as "SRC for the IF-AE16 signal line selected as the CLOCK MASTER is ON" could occur. In this case, the SRC item for that signal line will be turned off automatically and the INFO indicator will light red. In this situation, press the INFO button to open the following alert message. Once this has been confirmed, it will disappear. TASCAM DA-6400/DA-6400dp 29