TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.20 - Page 28
Tascam, Da-6400/da-6400dp
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
DA-6400/DA-6400dp ii Turn the MULTI JOG dial to change/set the output level for all channels. Press the MULTI JOG dial to set all channels to the output level shown and open the OUTPUT ATTENUATOR setting list screen. 4.3 EDIT MODE: When EDIT MODE is BATCH SETUP RANGE SELECT appears on the left side of the second selection line. Use the MULTI JOG dial or . and / buttons to move the blue cursor, and turn the MULTI JOG dial to set the starting and ending channel numbers for the range you want to adjust. Move the blue cursor to the OUTPUT ATT. item at the very bottom, and turn the MULTI JOG dial to change/set the output level for all channels. Press the MULTI JOG dial to set the selected channels to the output level shown and open the OUTPUT ATTENUATOR setting list screen. NOTE ii When the EDIT MODE item is set to ALL, the OUTPUT 01 setting is shown for the output value. ii When the EDIT MODE item is set to BATCH SETUP, the setting for the starting channel set in the RANGE SELECT item is shown for the output value. ii If the setting values of the channels being adjusted do not match, an * will be shown at the end of the output level value. If the setting values of all the channels being adjusted match, no * will be shown. 28 TASCAM DA-6400/DA-6400dp