TEAC CD-RW890 CD-RW890 Manual - Page 10

Basic Operation Turning on the power Basics of Playback 1 Press the OPEN/CLOSE (L) button. Press the POWER button to turn on the unit. Using Headphones The disc tray is opened. 2 Place a disc on the tray with the disc label side up. < Never place more than one disc on the tray. < The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. 3 Press the OPEN/CLOSE (L) button to close the tray. For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the LEVEL knob. When turning the power on/off, unplug the headphones. Failure to observe this precaution may cause a noise to be produced. The tray is closed. Take care that you do not catch your fingers in the tray. < It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed. 10