TEAC CD-RW890 CD-RW890 Manual - Page 24
Erasing All Tracks In Refresh Mode (CD-RW), Press the Play, button to start erasing.
View all TEAC CD-RW890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Erasing All Tracks In Refresh Mode (CD-RW) Erasing in the refresh mode takes time. It is recommended to use "ERASE DISC" when erasing all tracks. 3 Press the Play (y) button to start erasing. A disc that causes an error during recording may be recovered by erasing all tracks on the disc in the refresh mode. 1 Load a recorded CD-RW. 2 Press the ERASE button three times. All tracks will be erased. The time required appears on the display. When the operation has been finished, the display returns to the track/time display. < Never turn the power off nor unplug the power cord during erasing. < During erasing, no buttons will work. < This operation cannot be undone. Before erasing the tracks, make sure that you really want to erase them. "REFRESH" appears on the display. < Each time the ERASE button is pressed, the display changes as follows: &3"4& (#: The last track number) &3"4&%*4$ 3&'3&4) Total number of tracks and total playback time < If only one track is recorded, "ERASE" and the last track number do not appear. The display changes in the following order: &3"4&%*4$ 3&'3&4) Total number of tracks and total playback time < Press the Stop (H) button to stop erasing if you need. < If a finalized disc is inserted, "UNFINALIZE" appears. To erase the track(s), unfinalize the disc first. 24