TEAC CD-RW890 CD-RW890 Manual - Page 11

disc type indicator To stop playback total number of the tracks total play time of the disc The disc type indicator shows the type of disc currently loaded. CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW CD-R NO TOC : A CD-R which has yet to be finalized CD-RW NO TOC : A CD-RW which has yet to be finalized Press the Stop (H) button to stop playback. To skip to the next or previous track < As for non-audio discs, the content may be detected but will not be played. < When no disc is inserted, "NO DISC" appears. 4 Press the PLAY (y) button to start playback. During playback, repeatedly press the Skip (.or/) button until the desired track is found. The selected track will be played from the beginning. In the stop mode, press the Skip (.or/) button repeatedly until the track you want to listen to is found, and press the Play (y) button to start playback from the selected track. < When the . button is pressed during playback, the track being played will be played from the beginning. To return to the beginning of the previous track, press the . button twice. Disc playback starts from the first track. < If you load the disc, and then press the Play (y) button without closing the disc tray, the disc tray closes automatically and playback starts. < During programmed playback, the playback skips to the previous or next track in the program. Search for a part of a track < When the track number changes during playback of continuous music such as live performances, the sound may be cut then played. To pause playback During playback, hold down the Skip (. or /) button of the main unit and release it when the part you want to listen to is found. Use the Search (m or ,) button when operating with the remote control unit. Press the Pause (J) button during playback. Playback stops at the current position. To resume playback, press the Play (y) button or the Pause (J) button. 11