TP-Link EAP115-Wall EAP115EU-Wall V1 User Guide - Page 11
Wireless Basic Settings
View all TP-Link EAP115-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TIPS: Proceed to the following chapter for information on configuring the wireless network of the EAP. 5.1.1 Wireless Basic Settings Figure 5-3 Wireless Basic Settings 2.4GHz Check the box to enable 2.4GHz Wireless Radio. Wireless Radio: Wireless Mode: Select the protocol standard for the wireless network. Wireless network created by the EAP work within 2.4GHz. The EAP supports 802.11b/g/n, 802.11b/g, and 802.11n standards. It is recommended to select 802.11b/g/n, in which way clients supporting 11b, 11g or 11n mode can access your wireless network. Channel Width: Select the channel width of this device. Options include 20MHz, 40MHz and 20/40MHz (this device automatically selects 20MHz or 40MHz, and 20MHz will be used if 40MHz is not available). According to IEEE 802.11n standard, using a channel width of 40MHz can increase wireless throughput. However, users may choose lower bandwidth due to the following reasons: 1. To increase the available number of channels within the limited total bandwidth. 2. To avoid interference from overlapping channels occupied by other devices in the environment. 3. Lower bandwidth can concentrate higher transmit power, increasing stability of wireless links over long distances. 8