TP-Link T2500-28TCTL-SL5428E T2500-28TCUN V1 Installation Guide - Page 9
Installation
View all TP-Link T2500-28TCTL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
L2 Managed Switch Chapter 2 Installation 2.1 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One Switch One Power Cord and one This Installation Guide Console Cable T2500-28TC (TL-SL5428E) One Resource CD Two mounting brackets and the fittings 2.2 Safety Precautions To avoid any device damage and bodily injury caused by improper use, please observe the following rules. ■■ Safety Precautions ■■ Keep the power off during the installation. ■■ Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is well grounded. ■■ Use only the power cord provided with the switch. ■■ Make sure that the supply voltage matches the specifications indicated on the rear panel of the switch. ■■ Ensure the vent hole is well ventilated and unblocked. ■■ Do not open or remove the cover of the switch. ■■ Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never use any other liquid cleaning method. ■■ Site Requirements To ensure normal operation and long service life of the device, please install it in an environment that meets the requirements described in the following subsection. Temperature/Humidity T2500-28TC ȭ ȭ Installation 04