TP-Link TL-SG1016PE Easy Smart Switch User Guide - Page 29
IP Address, VLAN ID, Ports
View all TP-Link TL-SG1016PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
IP Address: VLAN ID: Ports: Displays the multicast IP address. Displays the VLAN ID of the multicast group. If the packet does not carry VLAN ID, then here displays the PVID of the port. All port members of a multicast group should be divided to the same VLAN, and have the same PVID. Displays the forwarding port list of the multicast group. 5.3 LAG LAG is used to combine a number of ports together to make a single high-bandwidth data path, which can highly extend the bandwidth. The bandwidth of the LAG is the sum of bandwidth of its member ports. There are some rules on using LAG: For the member ports in a LAG group, their configuration of Port setting (Speed and Duplex, Flow Control), QoS must be the same. For the newly joined member ports in a LAG group, their default setting of Port setting (Speed and Duplex, Flow Control), QoS will be configured the same as that of the first member port in the LAG group. The LAG member ports cannot be set as mirroring port. Before setting the LAG, its member ports should be divided to the same VLAN, and have the same PVID and drop the untagged packet rule. Change of the LAG setting will not affect the VLAN setting. If the LAG is needed, you are suggested to configure the LAG function here before configuring the other functions for the member ports. On this page, you can configure and view the information of the LAG group of the switch. 22