TP-Link TL-SG1016PE Easy Smart Switch User Guide - Page 44
Global Config, Port Based, 1p Based, DSCP Based, Port-based Priority Setting
View all TP-Link TL-SG1016PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Figure 8-5 QoS Basic The following entries are displayed on this screen: Global Config QoS Mode: Select the desired QoS mode. • Port Based: The switch classifies the ingress packets and maps the packets to different priority queues based on which port the packets come from. • 802.1p Based: The switch classifies the ingress packets and maps the packets to different priority queues based on the 802.1p priority field in the 802.1Q tag. • DSCP Based: The switch classifies the ingress packets and maps the packets to different priority queues based on the DSCP priority field in the IP ToS field. Port-based Priority Setting Port: Priority Queue: Select the desired port to configure its priority queue. It is multi-optional. Specify the priority queue the packets from the port are mapped to. The priorities are labeled as 1~4 and among them the bigger the value, the higher the priority. 37