TP-Link TL-SG1016PE Easy Smart Switch User Guide - Page 31
Monitoring
View all TP-Link TL-SG1016PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 6 Monitoring Monitoring module monitors the traffic information of the switch, and provides the convenient method to locate and solve the network problem, includes four submenus: Port Statistics, Port Mirror, Cable Test and Loop Prevention. 6.1 Port Statistics On this page you can view the statistic information of each port, which facilitates you to monitor the traffic and locate faults promptly. Choose the menu Monitoring→Port Statistics to load the following page. Figure 6-1 Port Statistics Info The following entries are displayed on this screen: Port Statistics Info Port: Status: Link Status: TxGoodPkt: TxBadPkt: RxGoodPkt: RxBadPkt: Displays the port number of the switch. Displays whether the port is enabled or disabled. Displays whether the port is link up or link down. Displays the number of good packets transmitted on the port. The error packets are not counted in. Displays the number of error packets transmitted on the port. Displays the number of good packets received on the port. The error packets are not counted in. Displays the number of error packets received on the port. Note: 1. The frames with more than 1518 bytes, less than 64 bytes or with bad Frame Check Sequence (FCS) are recorded as BadPkts. 2. Because of the supporting feature of jumbo frame, the frames with more than 1518 bytes and less than 10000 bytes will be recorded as GoodPkts and BadPkts at the same time, and can be forwarded normally. 24