TP-Link TL-SG1016PE Easy Smart Switch User Guide - Page 45
Bandwidth Control, Storm Control
View all TP-Link TL-SG1016PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
8.2 Bandwidth Control Bandwidth control functions to control the ingress/egress traffic rate on each port via configuring the available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed and utilized. On this page you can configure and view the bandwidth control function information. Choose the menu QoS→Bandwidth Control to load the following page. Figure 8-6 Bandwidth Control Setting The following entries are displayed on this screen: Bandwidth Control Setting Port: Select the desired port for bandwidth control configuration. It is multi-optional. Ingress Rate(Kbps): Here you can configure the port ingress rate limit. If the rate for receiving packets on the port exceeds the set rate, the packets will be discarded. Egress Rate(Kbps): Here you can configure the port egress rate limit. If the rate for sending packets on the port exceeds the set rate, the packets will be discarded. Note: 1. A port cannot enable both Storm Control and Ingress Rate Control at the same time. 2. When egress bandwidth control feature is enabled for one or more ports, you are suggested to disable the flow control on each port to ensure the switch works normally. 8.3 Storm Control Storm control function allows the switch to filter broadcast, multicast and UL frame in the network. If the transmission rate of the chosen packets exceeds the set bandwidth, the packets will be automatically discarded to avoid network broadcast storm. 38