TP-Link TL-SG105E TL-SG105E V1 UG - Page 36
Easy Smart Configuration Utility, 1Q VLAN PVID Setting, Switching, Port Trunk
View all TP-Link TL-SG105E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Easy Smart Configuration Utility User Guide Figure 6-6 802.1Q VLAN PVID Setting The following entries are displayed on this screen: ¾ 802.1Q VLAN PVID Setting Select: Select the desired port for configuration. It is multi-optional. Port: Displays the port number. PVID: Enter a PVID number for the port. When adding the tag header to the received untagged packet, the switch will automatically uses this PVID value as the VLAN ID of the added tag. LAG: Displays the LAG to which the port belongs. Note: 1. 802.1Q VLAN should be enabled before setting PVID. 2. You can go to Switching→Port Trunk page to configure the LAG status of the port. Return to CONTENTS 33
Easy Smart Configuration Utility
User Guide
33
Figure 6-6 802.1Q VLAN PVID Setting
The following entries are displayed on this screen:
¾
802.1Q VLAN PVID Setting
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
PVID:
Enter a PVID number for the port. When adding the tag header to
the received untagged packet, the switch will automatically uses
this PVID value as the VLAN ID of the added tag.
LAG:
Displays the LAG to which the port belongs.
Note:
1.
802.1Q VLAN should be enabled before setting PVID.
2.
You can go to
Switching
→
Port Trunk
page to configure the LAG status of the port.
Return to CONTENTS