TP-Link TL-SG5412F TL-SG5412F V1 User Guide - Page 189
read-only, read-write, Community Table, Modify, Operation, Description, SNMP Config, Global Config,
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Community Name: Access: MIB View: Community Table Select: Community Name: Access: MIB View: Operation: Enter the Community Name here. Defines the access rights of the community. read-only: Management right of the Community is restricted to read-only, and changes cannot be made to the corresponding View. read-write: Management right of the Community is read-write and changes can be made to the corresponding View. Select the MIB View for the community to access. Select the desired entry to delete the corresponding Community. It is multi-optional. Displays the Community Name here. Displays the right of the Community to access the View. Displays the Views which the Community can access. Click the Edit button to modify the MIB View and the Access right of the Community, and then click the Modify button to apply. Note: The default MIB View of SNMP Community is viewDefault. Configuration Procedure: If SNMPv3 is employed, please take the following steps: Step Operation Description 1 Enable SNMP function Required. On the SNMP→SNMP Config→Global Config page, globally. enable SNMP function globally. 2 Create SNMP View. Required. On the SNMP→SNMP Config→SNMP View page, create SNMP View of the management agent. The default View Name is viewDefault and the default OID is 1. 3 Create SNMP Group. Required. On the SNMP→SNMP Config→SNMP Group page, create SNMP Group for SNMPv3 and specify SNMP Views with various access levels for SNMP Group. 4 Create SNMP User. Required. On the SNMP→SNMP Config→SNMP User page, create SNMP User in the Group and configure the auth/privacy mode and auth/privacy password for the User. If SNMPv1 or SNMPv2c is employed, please take the following steps: Step Operation 1 Enable SNMP function globally. Description Required. On the SNMP→SNMP Config→Global Config page, enable SNMP function globally. 180