TP-Link TL-SG5412F TL-SG5412F V1 User Guide - Page 66
Link Type, VLAN ID Select, VLAN ID, VLAN Description, Operation
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Link Type: Select the Link Type from the pull-down list for the port. ACCESS: The ACCESS port can be added in a single VLAN, and the egress rule of the port is UNTAG. The PVID is same as the current VLAN ID. If the current VLAN is deleted, the PVID will be set to 1 by default. TRUNK: The TRUNK port can be added in multiple VLANs, and the egress rule of the port is TAG. The PVID can be set as the VID number of any VLAN the port belongs to. GENERAL: The GENERAL port can be added in multiple VLANs and set various egress rules according to the different VLANs. The default egress rule is UNTAG. The PVID can be set as the VID number of any VLAN the port belongs to. PVID: Enter the PVID number of the port. LAG: VLAN: Displays the LAG to which the port belongs. Click the Detail button to view the information of the VLAN to which the port belongs. Click the Detail button to view the information of the corresponding VLAN Figure 6-6 View the Current VLAN of Port The following entries are displayed on this screen: VLAN of Port VLAN ID Select: Click the Select button to quick-select the corresponding entry based on the VLAN ID number you entered. VLAN ID: Displays the ID number of VLAN. VLAN Description: Displays the user-defined description of VLAN. Operation: Allows you to remove the port from the current VLAN. Configuration Procedure: Step Operation Description 1 Set the link type for Required. On the VLAN→802.1Q VLAN→Port Config page, set port. the link type for the port based on its connected device. 57