TP-Link TL-SG5412F TL-SG5412F V1 User Guide - Page 74
VPN Config, 5.2 Port Enable
View all TP-Link TL-SG5412F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
LACP 802.1X 0x8809 0x888E Table 6-3 Values of Ethernet frame protocol type in common use This VLAN VPN function is implemented on the VPN Config and Port Enable pages. 6.5.1 VPN Config This page allows you to enable the VPN function, adjust the global TPID for VLAN-VPN packets and enable the VPN up-link port. When VPN mode is enabled, the switch will add a tag to the received tagged packet based on the PVID of the received port. Choose the menu "VLAN→VLAN VPN→VPN Config" to load the following page. Figure 6-10 VPN Global Config The following entries are displayed on this screen: Global Config VPN Mode: Allows you to Enable/Disable the VLAN-VPN function. Global TPID: Enter the global TPID (Tag protocol identifier). VPN Up-link Ports Select the desired port as the VPN Up-link port. It's required to set the port connected to the operators' backbone networks to be up-link port. 6.5.2 Port Enable On this page, you can enable the port for the VLAN VPN function. Only the port is enabled, can the configured VLAN VPN function take effect. 65